服务热线
027-88877678(销售)
027-88866656(行政)
单模光纤耦合器分为拉锥式和膜片式,用于将单模光纤的输入按既定的分光比分成两个输出,广泛应用于光纤激光器、光纤放大器,光纤通信以及光纤传感等领域,具有体积小、低插入损、低偏振相关损耗、高稳定性。
产品详情资料下载单模光纤耦合器分为拉锥式和膜片式,用于将单模光纤的输入按既定的分光比分成两个输出,广泛应用于光纤激光器、光纤放大器,光纤通信以及光纤传感等领域,具有体积小、低插入损、低偏振相关损耗、高稳定性。
There is two fabrication process for single mode fiber wavelengthdivision multiplexer base on fused biconical taper (FBT) technology and on thin-film filter technology, The couplersallows a single fiber input to be split into 2 outputs based on coupling ratioand it is ideal for fiber laser、fiber amplifier、fiber communication and fiber sensor. Csrayzer’s Coupler has low Insertion、compacted configuration、high return loss、high stability and reliability.
参数(Parameter) | 单位(Unit) | 指标(Values) | |||||||
---|---|---|---|---|---|---|---|---|---|
结构(Configuration ) | - | 1X2 or 2X2 | |||||||
中心波长(Center Wavelength) | nm | 633 | 780 | 830 | 980 | 1064 | 1310 | 1550 | 2000 |
工作波长范围(Operating Wavelength Range) | nm | ±3 | ±10 | ±10 | ±15 | ±15 | ±20 | ±20 | ±20 |
偏振相关损耗(Max.PDL) | dB | 0.2 | 0.2 | 0.2 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 |
典型附加损耗(Typ. Excess Loss) | dB | 0.8 | 0.5 | 0.5 | 0.4 | 0.4 | 0.4 | 0.3 | 0.5 |
最大附加损耗(Max. Excess Loss) | dB | 1.2 | 0.8 | 0.8 | 0.6 | 0.6 | 0.6 | 0.5 | 0.7 |
最小回波损耗(Min. Return Loss) | dB | 50 | |||||||
承受功率(Handing Power) | mW | 100 | 200 | 200 | 300 | 500 | 2000 | 2000 | 4000 |
最大承载拉力(Max. Tensile Load) | N | 5 | |||||||
光纤类型(Fiber Type) | - | 630HP | 780HP | 780HP | Hi980 | Hi1060 | SMF28e | SM1950 | |
工作温度(Working Temperature) | ℃ | -5 to +75℃ | |||||||
储存温度(Storage Temperature) | ℃ | -40 to +85℃ | |||||||
分光比/精度(Coupling Ratio and Tolerance) | |||||||||
分光比(Coupling Ratio) | % | 1/99 | 2/98 | 5/95 | 10/90 | 20/80 | 30/70 | 40/60 | 50/50 |
精度(Tolerance) | % | ±0.3 | ±0.5 | ±0.7 | ±1.0 | ±2.0 | ±2.0 | ±2.5 | ±3.0 |
*IL is 0.3 dB higher and RL is 5 dB lower for each connector added.
(FBT-SMC)/(SMFC)-①-②-③-④-⑤-⑥-⑦
①中心波长 (Central Wavelength) | ②结构 (Configuration) | ③分光比 (Coupling Ratio) | ④光纤类型 (Fiber Type) | ⑤光纤长度 (Fiber Length) | ⑥套管 (Fiber Jacket) | ⑦连接头 (Connector) |
---|---|---|---|---|---|---|
1064-1064nm | 1×2-1×2 | 1/99-1/99 | Hi980 | 1-1M | 0-Bare Fiber | FU-FC/PC |
1550-1550nm | 2×2-2×2 | 10/90-10/90 | Hi1060-Hi1060 | S-Specify | 1-900μm Loose Tube | FA-FC/APC |
2000-2000nm | 50/50-50/50 | SMF28e-SMF28e | 2-2mm Cable | S-specify | ||
S-Specify | S-Specify | S-Specify |