服务热线
027-88877678(销售)
027-88866656(行政)
在线起偏器是设计用来通过光的一个偏振态,阻止另一个偏振态。它可以将非偏振光变成高消光比的偏振光,它也可以用来提高信号的消光比。
On-line polarizer is designed to prevent another polarization state through one polarization state of light. It can turn unpolarized light into polarized light with high extinction ratio. It can also be used to improve extinction ratio of signals.
应用领域 Application area
·光纤激光器Fiber Laser
·光纤放大器 Optical Amplifiers
·测试设备 Testing Equipment
·光纤通信/光纤传感 Fiber Communication or Fiber Sensor
参数(Parameters) | 单位(Unit) | 指标(Values) | |
---|---|---|---|
中心波长(Center Wavelength) | nm | 1064 | 1310/1550 |
工作波长范围(Operating Wavelength Range) | nm | ±30 | ±50 |
典型插入损耗(Typ.Insertion Loss) | nm | 0.4 | 0.3 |
最大插入损耗 (Max. Insertion Loss) | dB | 0.6 | 0.5 |
典型消光比@25℃(Typ. Extinction Ratio) | dB | 30 | 25 |
最小消光比@25℃(Min. Extinction Ratio) | dB | 28 | 23 |
最小回波损耗(Min. Return Loss) | dB | 50 | 50 |
承受功率(Handing Power) | mW | 300 | 500 |
最大承载拉力(Max. Tensile Load) | N | 5 | 5 |
光纤类型(Fiber Tye) | - | PM Panda Fiber or SM Fiber | |
工作温度(Working Temperature) | ℃ | -45 to +70 | -45 to +70 |
储存温度(Storage Temperature) | ℃ | -55 to +85 | -55 to +85 |
备注:
*以上指标是不加连接头的参数.(Above specification are for component without connector)
*对于增加连接头的器件,插损增加0.3dB,回损将会降低5dB,消光比也会降低2dB左右.( IL will be 0.3dB Higher,RL will be 5dB lower and ER will be 2dB lower for component with connector)
*保偏光纤和连接器是慢轴对准。(The PM fiber and connector key are aligned to the slow axis)
ILP-①-②-③-④-⑤
①中心波长 Center Wavelength | ②输入输出光纤类型 Fiber Type On Input/Output | ③光纤长度 Fiber Length | ④套管 Fiber Jacket | ⑤连接器 Connector |
---|---|---|---|---|
1064-1064nm | PM980—PM980 Panda Fiber for all port | 1-1M | 0-Bare Fiber | N-None |
1310-1310nm | Hi1060-Hi1060 For all Port | 1.5-1.5M | 1-900um Loose Tube | FU-FC/UPC |
1480-1480nm | SMF28e-SMF28e For all Port | Specify-客户指定 | 2-2mm Cable | FA-FC/APC |
1550-1550nm | PM980/Hi1060—PM980 for Input&Hi1060 for Output | 3-3mm Cable | ||
PM1550- PM1550 Panda Fiber for all port | ||||
PM1550/SMF28e-PM1550 for Input&SMF28e for Output |