微型保偏光纤器件 weixingbaopianguangxianqijian
偏振分束器 Polarization Beam Splitter

偏振分束器用于将入射非偏振光分成两束偏振态正交的偏振光,两束出射的偏振光于入射光相互平行。o光源沿着原光路出射,没有位移,e光会沿着光轴方向走离,但是出射时仍然于入射光平行。偏振分束器也可以反过来用于将...

产品详情资料下载

偏振分束器用于将入射非偏振光分成两束偏振态正交的偏振光,两束出射的偏振光于入射光相互平行。o光源沿着原光路出射,没有位移,e光会沿着光轴方向走离,但是出射时仍然于入射光平行。偏振分束器也可以反过来用于将两束正交偏振态的偏振光合束。

Polarization beam splitter is used to divide incoming non-polarized light into two orthogonal polarized beams. The polarized light emitted by the two beams is parallel to the incident light. The o-component emits along the original optical path without displacement, and the e-component moves away along the optical axis, but it is still parallel to the incident light when it emits. Polarization beam splitter can also be used to realize the combination of two polarized beams with orthogonal polarization state.

应用领域  Application area  

·光纤激光器Fiber Laser

·光纤放大器 Optical Amplifiers

·测试设备 Testing Equipment      

·光纤通信/光纤传感 Fiber Communication or Fiber Sensor


技术指标

参数(Parameters)

单位(Unit)

指标(Values)

中心波长(Center Wavelength)

nm

980/1064

1310/1480/1550

等级(Grade)

-

P级(Grade P)

A级(Grade A)

P极(Grade P)

A极(Grade A)

工作波长范围(Operating Wavelength Range)

nm

±20

±20

±40

±40

典型插入损耗(Typ. Insertion Loss)

dB

0.6

0.7

0.4

0.5

最大插入损耗(Max. Insertion Loss)

dB

0.8

0.9

0.6

0.7

典型消光比 (Typ. Extinction Ratio For Splitter Only)

dB

22

20

22

20

最小方向性(Min. Directivity)

dB

50

50

50

50

承受功率(Handing Power)

mW

2000

500

最大承载拉力(Max. Tensile Load)

N

5

光纤类型(Fiber Tye)

-

PM980 Panda Fiber On Port1&2.

PM980 or Hi1060 On Port3

PM Panda Fiber On Port1&2.

PM Panda Fiber or SMF28e On Port3

工作温度(Working Temperature)

-5 to +75℃

储存温度(Storage Temperature)

-45 to +85℃

备注:

*以上指标是不加连接头的参数.(Above specification are for component without connector)

*对于增加连接头的器件,,回损将会降低5dB,消光比也会降低2dB左右.( RL will be 5dB lower and ER will be 2dB lower for component with connector)

*保偏光纤和连接器是慢轴对准。(The PM fiber and connector key are aligned to the slow axis)


订货信息

PBC-①-②-③-④-⑤-⑥

PBS-①-②-③-④-⑤-⑥

①中心波长
Center Wavelength
②等级
Grade
③光纤类型
Fiber Type On Port3
④光纤长度
Fiber Length
⑤套管
Fiber Jacket
⑥连接器
Connector
980-980nmP-PremiumHi1060-Hi1060 Fiber1-1M0-Bare FiberN-None
1064-1064nmA-A GradeSMF28e-SMF28e Fiber1.5-1.5M1-900um Loose TubeFU-FC/UPC
1310-1310nm
PM980- PM Panda Fiber, Slow axis align to Port1Specify-客户指定2-2mm CableFA-FC/APC
1550-1550nm
PM980&45°-PM Panda Fiber, Slow axis align 45°to Port1
3-3mm Cable


PM980/Hi1060—PM980 On Port1&2 ,Hi1060 for Port3




PM1550- PM1550 Panda Fiber, Slow axis align to Port1




PM1550&45°-PM1550 Panda Fiber, Slow axis align 45°to Port1